Chinese translation for "centrifugal nozzle"
|
- 径向流喷嘴
离心式喷咀
Related Translations:
- Example Sentences:
| 1. | This " paper mainly researches on the humidifying property of the centrifugal nozzle with firing pin type , high pressure and little aperture
课题主要对撞针型高压小孔径离心式喷嘴的雾化加湿性能进行研究。 | | 2. | However , the related research is rarely reported on the humidifying property of the centrifugal nozzle with firing pin type , high pressure and little aperture
但当前对该类型喷嘴加湿性能的相关研究还较少见诸报道。 | | 3. | The machine can press liquid material into centrifugal nozzle to spray micro fog drops that will drying in the tower relaying on convective flow with hot air
本机是将料液压入压力喷嘴雾化成微小雾滴，在塔内与热风以对流的方式完成干燥，获得颗粒产品。 | | 4. | Its atomized parcel is so small that no drip is separated out . this kind of centrifugal nozzle has high humidifying efficiency and low energy cost , which could be used in many situations in textile factories such as directly humidifying in workshop and humidifying in air pipeline
撞针型高压小孔径离心式喷嘴的雾化粒子细小、无水滴析出、加湿效率高、耗能少，可直接向车间加湿，适用于纺织厂等多种应用场合。 | | 5. | As to the work about theory analysis , at first , the paper describes the atomizing and humidifying process of the centrifugal nozzle with firing pin type , high pressure and little aperture and liquid physical properties . later , combining with the structure characters of this kind of nozzle , the paper studies on the theory of the atomizing and humidifying process by three phases , which is water film forming phase , water film falling into pieces phase , and heat and mass transfer between water and air phase in turn
理论工作方面，首先描述了撞针型高压小孔径离心式喷嘴的雾化加湿过程和液体的物理性质，然后结合撞针型高压小孔径离心式喷嘴的结构特点，将其雾化加湿过程分三个阶段进行机理上的研究，这三个阶段依次为液膜形成、液膜初次破碎及二次雾化、水与空气的热湿交换。 | | 6. | Based on the theory analysis and experiment work , the paper studies the humidifying property of the centrifugal nozzle with firing pin type , high pressure and little aperture . compared with the traditional air washer , the high efficiency and energy saving character of this kind of nozzle is stood out
课题从理论和试验两方面分析研究了撞针型高压小孔径离心式喷嘴的雾化加湿性能，并将其与传统喷水室加湿系统进行能耗比较，突出了撞针型高压小孔径离心式喷嘴高效节能的特点。 | | 7. | Through the special studies on impacts to atomizing and humidifying effect from such factors as the firing pin type , centrifugal structure , higher spraying pressure , less aperture , initial water temperature and original state of the air , some conclusions are obtained , such as : the centrifugal nozzle with firing pin type , high pressure and little aperture has bigger air eddy and atomizing angle . the spaying liquid has high velocity . the droplet is small , and the heat and mass transfer velocity is high
通过对撞针型结构、离心式结构、较高的喷水压力、较小的喷嘴孔径、喷水初温及待加湿空气初状态对雾化加湿效果的作用原理的重点分析，得到：撞针型高压小孔径离心式喷嘴具有较大的空气涡与雾化角，喷出的液体流速高、液滴小、水与空气传热传质速率高，撞针型结构提高了雾化加湿效率，高压小孔径的特点为雾化加湿提供了较大的能量，而喷水初温的升高会减小水的粘性力和表面张力，从而优化加湿效果。 | | 8. | Integrated the work on theory and experiment , the paper provides technical performance material at large about the automating and humidifying character of the centrifugal nozzle with firing pin type , high pressure and little aperture to the manufacture and user . with the valuable reference during the selecting the equipment and ascertaining the parameters , the users could select and control the humid parameter
课题的理论与试验两方面工作相结合，为撞针型高压小孔径离心式喷嘴的雾化加湿性能提供了较为详细的技术性能资料，为生产厂家和用户在设备选型和参数选择过程中，提供了有价值的参考，便于用户正确而经济地选择、控制湿度参数，有效调节喷嘴孔径、喷水初温和喷水压力的大小。 |
- Similar Words：
- "centrifugal muller" Chinese translation, "centrifugal multi stage pump" Chinese translation, "centrifugal multistage pump" Chinese translation, "centrifugal nerve" Chinese translation, "centrifugal nerve fibres" Chinese translation, "centrifugal oil clarifier" Chinese translation, "centrifugal oil cleaner" Chinese translation, "centrifugal oil extractor" Chinese translation, "centrifugal oil filer" Chinese translation, "centrifugal oil filter" Chinese translation
|
|
|
